Product Features
Resolutions and cable lengths
The maximum resolutions achievable are:
1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.
Power
The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector
Mini DisplayPort version available
Some computers, servers and graphics cards (Apple Mac Pro and ATI Radion graphics cards) come with mini DisplayPort connectors as these are smaller than the standard connector. A version of the CAM is available with Mini DisplayPort connectors.
EDID display information
The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer.
USB
The CAM supports low speed (1Mb/s) HID USB devices only.
Audio
2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.
Specifications
Maximum Video Resolution
1920 x 1200
Extension Distance
1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.
O/S Compatability
Operating system independent
Connectors
Display Port version:
1 x Display Port;
1 x USB- Type A plug;
1 x 3.5 mm jack plug and 1 x RJ45.
Mini Display port Version:
1 x Mini Display Port;
1 x USB- Type A plug;
1 x 3.5 mm jack plug and 1 x RJ45
Physical design
Local: Hi Impact resistance ABS, 45mm /1.75’’ (w) x 75mm / 3’’(d) x 25mm / 1’’ (h) with 300mm/12’’ flying leads Weight 100g / 0.2 lb
Power
USB powered device Max 500mA @ 5V
Operating temperature
0ºC to 40º / 32ºF to 104ºF
Approvals
CE, FCC