ADDERLink™ XD641

A high-resolution single-head KVM extender. Ultra high-definition 4K60 video, USB2.0 and audio are transmitted on a single CATx or fiber cable.

XD641_TX_FRONT_QTR_NOREF

Overview

The ADDERLink™ XD641 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

Developed for enterprise organizations and high-pressure control rooms, it combines the simplicity of true plug and play and high performance 4K KVM extension; resulting in superior functionality and flexibility in a cost-effective, reliable and straightforward solution.

  • Single head 4K60 video, USB2.0 (HID) and audio are transmitted on a single CATx or fiber cable. 
  • Point-to-point protocol for ultra-low latency.
  • Flexibility between copper and fiber connectivity. 
  • Adder’s USB emulation ensures reliable computer bootup.
Product codes
XD641P-DP
ADDER_XD641_DS_DIAGRAM

Product Features

High-resolution video, real-time control
The system supports resolutions up to 4096x2160 @ 60Hz using 8 bits per color and 4:4:4 chroma sampling. A local pass-through video port is provided at the transmitter (TX).

Single cable
4K60 video, USB2.0 HID (human interface device) and audio are transmitted on a single CATx or fiber cable.

Up to 4km/2.5 mile extension distances
The ADDERLink XD641 supports both copper and fiber interfaces. It provides a range of up to 100m over a CAT6 cable link, and up to 4km over an optical fiber link.

Emulated USB2.0
Enables connection of any full and low speed USB HID from mouse and keyboards through to graphics tablets and joysticks.

EDID management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and play
The ADDERLink XD641 extender is delivered in a zero config. state so it works, without the need for drivers or software, as soon as it is connected.

Digital audio
Video:  Encapsulates up to eight channels of 24-bit, 192kHz sampled “Pulse-code modulation” (PCM) uncompressed audio integrated with the video signal.
USB:  Up to two channels of 24-bit, 96kHz sampled PCM audio. HD quality analog audio HD audio quality (stereo audio, 24-bit sampled at 96kHz) is available for line in/out, microphone and headphone/speakers. Serial communications  RS232 can be passed between the units to a maximum baud rate 115K2 with RTS/CTS flow control. 

HD quality analog audio 
HD audio quality (stereo audio, 24-bit sampled at 96kHz) is available for line in/out, microphone and headphone/speakers. 
 
Serial communications  
RS232 can be passed between the units to a maximum baud rate 115K2 with RTS/CTS flow control. 

Specification

Video resolutions
  • The system supports resolutions up to 4096x2160 @ 60Hz

Software compatibility

  • All known operating systems. No drivers required.

Extension technology

  • 5Gb/s CATx or 10Gb/s fiber with ultra low latency adaptive video stream compression.

Connections
Local unit - Transmitter (TX)

  • 4 x Tri-color status LEDs
  • DisplayPort™ in and local pass-through out
  • 2 x USB2.0 Type B
  • Line in and out analog audio
  • RJ12 serial port
  • RJ45 and SFP+ ports

Remote unit - Receiver (RX)

  • 4 x Tri-color status LEDs
  • 2 x DisplayPort™ out (second port is a duplicate)
  • 4 x USB2.0 full speed Type A
  • Mic in, headset and speaker out
  • RJ12 serial port
  • RJ45 and SFP ports

Physical Design
Robust metal construction

  • TX and RX: 186mm/7.32” (w), 39mm/1.54” (h), 148mm/5.83” (d)
  • TX: 1.29kg/2.84lbs
  • RX: 1.24kg/2.73lbs
Power supply
  • 100-240 VAC, 47/63Hz
  • 12 VDC 18W output from power supply unit

Operating temperature

  • 0ºC to 40ºC/32ºF to 104ºF

Storage temperature

  • -10ºC to 50ºC/14ºF to 122ºF

Humidity

  • 0% to 80% (non-condensing)

Approvals

  • CE, FCC

Extension Distance

ADDERLink™ XD600 Extension Distance

 

 

 

 

 

Note:

SM (Single-Mode Fiber)
MM (Multi-Mode Fiber)
CAT6 is recommended for CATx extensions. CATx extensions are limited to 2 patch connections.  Patch cables should be CAT6 or better.

Associated products

ADDERLink™ XD614

The ADDERLink™ XD614 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

ADDERLink™ XD642

The ADDERLink XD642 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

Product Gallery

Downloads

Product datasheets
Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
What's in the box

1x TX and RX pair
2x Power supply unit with country specific mains cable
1x DisplayPort™ cable (VSCD17)
1x USB cable (VSC24)
1x Audio 2m/6ft cable
1x Quick start guide

Ordering information

XD641P-DP-XX: ADDERLink 4K single-head extender

XX = Mains Lead Country Code:

UK = United Kingdom
US = United States
EURO = Europe
CN = China
JPN = Japan
AUS = Australia

Contact

Are you interested in this product and would like to find out more?

Our team of KVM experts are on hand to help guide you through our extensive range of products, understand how Adder can help your KVM requirements and of course anwser any queries you may have.

Contact us using the form on the right hand side and one of KVM experts will respond to your queries.