Search Search

ADDERLink® XD642

A high-resolution dual-head KVM extender. Ultra-high definition 4K60 video, USB2.0 and audio are transmitted on a single CATx or fiber cable.

XD642_TX_FRONT_QTR_NOREF

Overview

The ADDERLink XD642 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

Developed for enterprise organizations and high-pressure control rooms, it combines the simplicity of true plug and play and high performance 4K KVM extension; resulting in superior functionality and flexibility in a cost-effective, reliable and straightforward solution.

  • Dual-head 4K60 video, USB2.0 and audio
  • Point-to-point protocol for ultra-low latency.
  • Flexibility between copper and fiber connectivity. 
  • Adder’s USB emulation ensures reliable computer bootup.
Product codes
XD642P-DP
ADDER_XD642_DS_DIAGRAM

Product Features

High-resolution video, real-time control 
The system supports resolutions up to 4096x2160 @ 60Hz using 8 bits per color and 4:4:4 chroma sampling.

Single cable 
Video, audio, USB HID (human interface device), hi-speed transparent USB and RS232 signals are transmitted over a single CATx or fiber cable.

Up to 4km/2.5 mile extension distances   
The ADDERLink XD642 supports both copper and fiber interfaces. It provides a range of up to 100m over a CAT6 cable link, and up to 4km over an optical fiber link.

Emulated USB2.0 
Enables connection of any full and low speed USB HID from mouse and keyboards through to graphics tablets and joysticks.

Transparent USB2.0
Mass storage devices and isochronous devices, such as webcams and audio headsets can be used through the transparent USB2.0 hi-speed port.

EDID management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and Play
The ADDERLink XD642 extender is delivered in a zero config. state so it works, without the need for drivers or software, as soon as it is connected. 

Digital audio 
Video: Encapsulates up to eight channels of 24-bit, 192kHz sampled “Pulse-code modulation” PCM uncompressed audio integrated with video signal.  
USB: Up to two channels of 24-bit, 96kHz sampled PCM audio. 

HD quality analog audio 
HD audio quality (stereo audio, 24-bit sampled at 96kHz) is available for line in/out, microphone and headphone or speakers. 
 
Serial communications  
RS232 can be passed between the units to a maximum baud rate 115K2 with RTS/CTS flow control. 

Specification

Video resolutions
  • The system supports resolutions up to 4096x2160 @ 60Hz

Software compatibility

  • All known operating systems. No drivers required.

Extension technology

  • 5Gb/s CATx or 10Gb/s fiber with ultra low latency adaptive video stream compression.

Connections
Local unit - Transmitter (TX)

  • 4 x Tri-color status LEDs
  • 2 x DisplayPort™ in
  • 1 x USB2.0 Type B for HID
  • 1 x USB2.0 Type B for hi-speed
  • Line in and out analog audio
  • RJ12 serial port
  • RJ45 and SFP+ ports

Remote unit - Receiver (RX)

  • 4 x Tri-color status LEDs
  • 2 x DisplayPort™ out
  • 3 x USB2.0 full speed Type A
  • 1 x USB2.0 transparent hi-speed Type A
  • Mic in, headset and speaker out
  • RJ12 serial port
  • RJ45 and SFP+ ports

Physical Design
Robust metal construction

  • TX and RX: 186mm/7.32” (w), 39mm/1.54” (h), 148mm/5.83” (d)
  • TX: 1.29kg/2.84lbs
  • •RX: 1.24kg/2.73lbs

Power supply

  • 100-240 VAC, 47/63Hz
  • 12 VDC 18W output from power supply unit
 Operating temperature
  • 0ºC to 40ºC/32ºF to 104ºF

Storage temperature

  • -10ºC to 50ºC/14ºF to 122ºF

Humidity

  • 0% to 80% (non-condensing)

Approvals

  • UKCA, CE, FCC, ICES, RCM, cULus

Extension Distance

ADDERLink™ XD600 Extension Distance

 

 

 

 

 

Note:

SM (Single-Mode Fiber)
MM (Multi-Mode Fiber)
CAT6 is recommended for CATx extensions. CATx extensions are limited to 2 patch connections.  Patch cables should be CAT6 or better.
Associated products
Thumbnail

ADDERLink® XD612

The ADDERLink® XD612 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

View product
Thumbnail

ADDERLink® XD614

The ADDERLink® XD614 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

View product
Thumbnail

ADDERLink® XD641

The ADDERLink® XD641 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.

View product

Product Gallery

XD642_TX_FRONT_QTR_NOREF ADDER_XD642_DS_DIAGRAM XD642_RX_FRONT_NOREF ADDER_XD642_RX_REAR_NOREF XD642_RX_BACK_QTR_L_NOREF /ADDER_XD642_RX_BACK_QTR_R_NOREF XD642_TX_FRONT_NOREF XD642_TX_REAR_NOREF XD642_TX_BACK_QTR_L_NOREF XD642_TX_REAR_QTR_R_NOREF
Related accessories
Thumbnail

ADDER SFP-MM-LC-10G

Multi-mode 10Gbps SFP+ with LC connectors. This transceiver uses a 850 nm VCSEL laser and is designed to transmit and receive optical data over multi-mode optical fiber for link length 300m.

Optical interface compliant to IEEE 802.3ae

RoHS-6 compliant (lead free)

View product
Thumbnail

ADDER SFP-SM-LC-10G

Single mode 10Gbps SFP+ with LC connectors. This transceiver uses a 1310 nm DFB laser and is designed to transmit and receive optical data over single mode optical fiber for link length 10km.

Optical interface compliant to IEEE 802.3ae

RoHS-6 compliant (lead free)

View product
Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
What's in the box

1x TX and RX pair
2x Power supply unit with country specific mains cable
2x DisplayPort™ cable (VSCD18)
1x USB cable (VSC24)
1x Audio 2m/6ft cable
1x Quick start guide

Ordering information

XD642P-DP-XX: ADDERLink XD642 - 4K dual-head extender

XX = Mains Lead Country Code:

UK = United Kingdom
US = United States
EURO = Europe
CN = China
JPN = Japan
AUS = Australia

Contact

Are you interested in this product and would like to find out more?

Our team of KVM experts are on hand to help guide you through our extensive range of products, understand how Adder can help your KVM requirements and of course anwser any queries you may have.

Use this form to enquire about Adder's products and services. One of our IP KVM experts will be in touch with you as soon as possible.

If you need technical support, please click here instead