ADDERView Secure Analogue: Standard 

Optimize the security of KVM switching with ADDERView SecureSwitch Analogue Standard

ADDERView Secure Analogue

Overview

The ADDERView® Analogue Standard SecureSwitch allows a keyboard, monitor and mouse to be shared between high and low security systems, “red and black networks”.  The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data.
 

  • Secured Channel Switching: device can only be directly controlled, not via peripherals
  • Security of Data: unidirectional flow of data and controlled memory limits access to information
  • Tamper Proof Design: physical casing and circuitry minimize risk of unauthorized access
  • Industry Recognized: designed to meet Common Criteria; EAL4+ certified 
Product codes
AVSV1002
AVSV1004
ADDERView Secure Analogue

Product Features

  • TEMPEST qualified and EAL4+ certified: Tempest certified design (USA NSTISSAM Level I and NATO SDIP-27 Level A), EAL4+ Common Criteria Evaluation Assurance Level 4 (augmented by ALC_ FLR.2 and ATE_DPT.2)
  • Physical port identification: Channel switching is controlled only from the front panel buttons. No keyboard or mouse switching commands are permitted.  Two port and four port sizes are available as standard or enhanced versions. 
  • Hardwired port isolation: Data Diodes implemented within hard-wired electronic circuitry ensure unidirectional flow of critical data paths, safeguarding any compromised peripheral by preventing reading of information or transfer of data by another system. Peripherals are always powered down and re-initialized in the event of a change of channel, providing an additional of protection against hidden peripheral malware.
  • No critical software reliance: Minimized use of software within the unit avoids the possibility of subversive reprogramming. One-time programmable storage replaces flash memory in all security critical areas of the device
  • Designed for minimal emissions and isolation of electrical crosstalk:  Electromagnetic emissions are reduced and transmission of signals to other computers are prevented due to extensive shielding of the outer casing and of internal circuitry.  External probing and unauthorized internal access are prevented through the unit design, with as few apertures as possible.

Specification

Approvals / Compliance
⦁    CE
⦁    FCC
⦁    Designed to meet Common Criteria EAL4+ certified (EAL4+ certificate available)
⦁    Tempest qualified design

Standards
Compatible with all known hardware platforms featuring VGA video and USB HID or PS/2 connectivity

Support for all known software and operating systems including Windows (all), DOS, Linux, Unix, BSD, Sun OS, Solaris, Mac OS, NetWare

Video Analog: up to 1920 x 1200 @ 60Hz 

Cable Guidelines
The special cables available for connections to each system are carefully constructed with braid and foil to provide excellent screening against signal emissions that could otherwise be eavesdropped. A similarly constructed cable is also available for the monitor connection (VSCD9).
The special cables already have ferrite cores fitted to assist with signal suppression. For USB peripheral connections, we strongly recommend that (if not already fitted) you attach ferrite cores to those cables to further assist with emission suppression.

⦁    Shielded link cable (VGA, PS/2 keyboard, PS/2 mouse) Part code:  VSCD5 (length 1.8m/6ft)
⦁    Shielded link cable (VGA, USB keyboard/mouse, USB card reader) Part code:  VSCD6 (length 1.8m/6ft)
⦁    Shielded link cable (VGA, USB keyboard/mouse) Part code:  VSCD7 (length 1.8m/6ft)
⦁    Shielded link cable (VGA only) Part code:  VSCD9 (length 1.8m/6ft)

Environmental
0 to 40ºC / 32 to 104ºF

Computer Connections Transmitter (TX) 
2 x USB HID (Keyboard/Mouse), HD-15 VGA, 2 or 4 x system link connection, smart card USB

Mechanical
Compact case, robust metal construction, extensive shielding

Power
100-240V AC 47/63Hz

Associated products

ADDERView Secure Analogue: Enhanced 

The ADDERView® Analogue Enhanced SecureSwitch allows a keyboard, monitor and mouse to be shared between high and low security systems, “red and black networks” together with secure smartcard reader sharing.  The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data.
 

ADDERView Secure Digital: Standard 

The ADDERView® Digital Standard SecureSwitch allows a keyboard, monitor and mouse to be shared between high and low security systems, “red and black networks”, with optimized security to prevent the compromise of critical data.

ADDERView 4 PRO DVI

Part of the ADDERView® PRO range, the AV4PRO DVI is KVMA switch designed to enable four multi-head computers to be controlled from a single KVM console. This four-port switch is available in eight-port (AV8PRO), Multiscreen, VGA or DisplayPort variants.

ADDERView 8 PRO DVI

Part of the ADDERView® PRO range, the AV8PRO DVI is KVMA switch designed to enable eight computers to be controlled from a single KVM console using either dual link DVI or high definition analog video links. This eight-port switch is available in four-port (AV4PRO DVI), VGA or DisplayPort variants.

Product Gallery

Downloads

Product manual
White papers
Secure KVM Switching White Paper
White paper

Assured separation with easy access.

“Securing a computer system has traditionally been a battle of wits: the penetrator tries to find the holes, and the designer tries to close them.” Morrie Gasser, author of Building a Secure Computer System.

Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
Ordering information

AVSV1004 (Analogue Standard 2-port)
AVSV1002 (Analogue Standard 4-port)

XX = Mains Lead Country Code:
UK  = United Kingdom
US  = United States
EURO  = Europe
AUS  = Australia

Export restrictions apply to specific countries. Please enquire with Adder if you are considering exporting these products.

CABLES
The special cables available for connections to each system are carefully constructed with braid and foil to provide excellent screening against signal emissions that could otherwise be eavesdropped. A similarly constructed cable is also available for the monitor connection (VSCD9).
The special cables already have ferrite cores fitted to assist with signal suppression. For USB peripheral connections, we strongly recommend that (if not already fitted) you attach ferrite cores to those cables to further assist with emission suppression.
Shielded link cable (VGA, PS/2 keyboard, PS/2 mouse) Part code:  VSCD5 (length 1.8m/6ft)
Shielded link cable (VGA, USB keyboard/mouse, USB card reader) Part code:  VSCD6 (length 1.8m/6ft)
Shielded link cable (VGA, USB keyboard/mouse) Part code:  VSCD7 (length 1.8m/6ft)
Shielded link cable (VGA only) Part code:  VSCD9 (length 1.8m/6ft)