ADDER SFP-CATX-RJ45

Product title

ADDER SFP-CATX-RJ45

One liner

1GbE SFP fiber module for CATX cable

Product description

1Gbps SFP module with 8p8c connector, suitable for connecting to CATX cables via RJ45 connector.

Compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab. Supports 1000Mbps data-rate up to 100 meters over unshielded, twisted-pair, category 5 cable.

Product categories
Features
Ready for translation
Off
Product type

ADDER SFP-SM-LC

Product title

ADDER SFP-SM-LC

One liner

Single mode 1GbE SFP fiber module with LC connectors

Product description

Singlemode 1Gbps SFP with LC connectors. This transceiver uses a 13510 nm FP laser and is designed to transmit and receive optical data over single mode optical fiber link of up to 20km. Compliant with SFP MSA and SFF-8472.

Product categories
Features
Ready for translation
Off
Product type

ADDER SFP-SM-LC-10G

Product title

ADDER SFP-SM-LC-10G

One liner

Single mode 10Gbps SFP+ with LC connectors.

Product description

Single mode 10Gbps SFP+ with LC connectors. This transceiver uses a 1310 nm DFB laser and is designed to transmit and receive optical data over single mode optical fiber for link length 10km.

Optical interface compliant to IEEE 802.3ae

RoHS-6 compliant (lead free)

Product categories
Features
Ready for translation
Off
Product type

ADDER SFP-MM-LC

Product title

ADDER SFP-MM-LC

One liner

Multi mode 1GbE SFP fiber module with LC connectors

Product description

Multimode 1Gbps SFP with LC connectors. This transceiver uses a 850 nm VCSEL laser and is designed to transmit and receive optical data over multimode optical fiber for link length of up to 550m for 50/125uM cable. Compliant with SFP MSA and SFF-8472.

Product categories
Features
Ready for translation
Off
Product type

ADDER SFP-MM-LC-10G

Product title

ADDER SFP-MM-LC-10G

One liner

Multi-mode 10Gbps SFP+ with LC connectors.

Product description

Multi-mode 10Gbps SFP+ with LC connectors. This transceiver uses a 850 nm VCSEL laser and is designed to transmit and receive optical data over multi-mode optical fiber for link length 300m.

Optical interface compliant to IEEE 802.3ae

RoHS-6 compliant (lead free)

Product categories
Features
Ready for translation
Off
Product type

ADDER RED-PSU PRO

Product title

ADDER® RED-PSU PRO

One liner

19 inch rack mountable power distribution unit with 8 or 16 outputs 12V30W redundant power supply.

Product description

ADDER® RED-PSU PRO provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED-PSU PRO delivers up to 16 power 12VDC outputs, hot swappable power modules and remote management.

• 8 or 16 port independently controllable
• 12V outputs
• 2 hot swappable power modules
• Controllable via secure HTTP interface
• REST API for 3rd party control integration
• 900,000hrs MTBF ratings on power modules
• 12V to 5V cable converters available for units with 5V power feeds

Product specifications part 1

Mains inputs
• 2x IEC 90-264VAC 47/63Hz input
• Efficiency 94% @50% load
• Power Factor 0.9 MIN typical

Peripheral connections
• 1x 8p8c for 10/100 Ethernet connection

Power
• 8 or 16x locking 3-pin DC connector, 12VDC 30W output.
• Each output is a Limited Power Source Service (LPS) to IEC 60950-1

Physical design
Compact case, robust metal construction
• Designed for 19 inch rack mounting
• (W)435mm/17.13” x (H)44mm/1.73” x (D)275mm/10.8”
• Weight: 4.5kg/9.9lbs

Operating conditions
• Temperature 0 to 50ºC/32 to 122ºF
• Humidity 10–95% Non condensing
• Altitude <2000Meters / 6500ft

Mean Time Between Failure (MTBF)
• PSU-REDPRO(x)-8 = 1,000,000hrs
• PSU-REDPRO(x)-16 = 600,000hrs
(Both units tested at 55°C ambient, 50% electrical stress, Telcordia SR-332 Issue 4)

• PSU-REDPRO-495W = 900,000hrs
(Tested at 55°C ambient, 80% Iout max, Telcordia Issue 3 Method 1 Case 3)

Local client requirements
Browser versions
• Internet Explorer™ 10,11
• Firefox™ 24 ESR and above
• Chrome™ 44 or above

Approvals
• CE/UKCA/FCC/ICES/cULus

Standards
• IEC/EN/UL 62368-1, EN55032, EN55035, EN61000-3-2, EN61000-3-3, CFR47 pt15a

Compliance
• REACH/RoHS/CAL PROP 65

Product features part 1

Power to match your needs
While individual Adder power adapters perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. ADDER® RED-PSU PRO (RED-PSU PRO) provides a significant step up in terms of efficiency, reliability and power management.

8 or 16 port power outputs with locking connectors
RED-PSU PRO is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 30W at 12V and each uses a locking connector to guard against accidental disconnection.

Hot swappable power modules
Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 495W power modules, which slot into the rear of the RED-PSU PRO chassis. A single power module is rated at 900,000 hrs MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation.

Protection
Power integrity, safety and management are core components of the RED-PSU PRO system. At start up, RED-PSU PRO enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device.

Web interface control
RED-PSU PRO can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information.

REST API
A REST (Representational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface.

12V to 5V converter for 5V products
Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED-PSU PRO, including the ADDERLink™ INFINITY range.

Product manual
What's in the box

1x RED-PSU PRO unit (To the specification in the ordering information)
1x country specific power cable
1x quick start guide

Ordering information

Redundant power supply units: (Pre-fitted with two removable power supplies)
PSU-REDPRO2-8-XX: 8-port power supply system*
PSU-REDPRO2-16-XX: 16-port power supply system*

Power supply units: (Pre-fitted with one removable power supply)
PSU-REDPRO1-8-XX: 8-port power supply*
PSU-REDPRO1-16-XX: 16-port power supply

*standard rack mount ears included

Ready for translation
Off
Product datasheets

ADDER VSC48 Cable

Product title

ADDER VSC48 Cable

One liner

2m power cable for ADDER RED-PSU, ADDERLink™ XD150FX, ADDERLink INFINITY Manager, and the ADDER CCS-PRO range

Product description

2m power cable for the ADDER RED-PSU, ADDERLink™ XD150FX, ADDERLink INFINITY Manager, and the ADDER CCS-PRO range

Product categories
Product codes
Ready for translation
Off
Product type