Flexible and scalable: Each XDIP unit can be configured as a simple extender, distributed KVM switch or for AV distribution. Each receiver can see up to 16 sources and each transmitter can connect to up to 256 receivers.

Configurable units: The XDIP user and computer units are identical and can be configured as a transmitter or receiver. This means the solution can be built to suit the application, and should the application change, units can be re-configured to suit.

High quality video: The XDIP supports video resolutions of up to 1920 x 1200 @ 60Hz.

Power over Ethernet (PoE): Compatible with most PoE switches, the XDIP can be easily installed without the need for additional power. Many PoE switches offer redundant power options which the XDIP can leverage for enhanced reliability. 

Remote control: Users can remotely control their XDIP network via a RESTful API or HTTPS web browser. By managing the receiver end points through an API, users can control the matrix. The XDIP is designed to work with any third party controller via HTTPS.

Extension distance: Extension distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances can be achieved by routing through IP infrastructure. 

Audio capability: XDIP delivers bi-directional analog audio  (16-bit sampling at 48kHz) passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).

Plug and Play: The XDIP is delivered in a zero config. state so it works, without the need for drivers or software, as soon as it is connected. A simple setup wizard guides the user through set up when the device is connected.

• Multiscreen: replicating the exact content shown on the local monitor
• Digital-quality video: VGA resolutions of up to 1920 x 1200 @60Hz are achievable at 300m (1000ft). Variable noise filter for extension in excess of 200m
• Video compensation: Multi-pole compensation technique enables uncompromised video quality at maximum distance over a single cable. Color skew compensation and gain adjustment controlled from the receiver’s keyboard to ensure crystal clear images
• Local feed through port: for audio and video, enabling a local console to be used
• USB powered transmitter: reduces the need for external supplies, with external power supply in place as backup

• Dual user configuration: Two X-USB PRO units linked to the USB sub-system of a single computer enables two users to access the system simultaneously
• Emulated two page DDC EDID: Support for full two page Display Data Channel Extended Display Identification Data which enables the remote system to exactly mirror the data coming from the source monitor
• USB support: Low and Full speed USB extension supporting all USB compatible accessories (including isochronous devices). 4 port USB hub within the receiver unit enables a complete desktop to be located remotely, including support for keyboard, monitor, mouse, disk drive, flash memory stick, webcam, and any other device USB device.
• Audio transmission: delivers CD quality stereo audio for speakers
• Rack options: Both transmitter and receiver units can be used stand-alone or up to 16 units can be mounted into a 2U chassis

• Digital like video: VGA resolutions of 1920 x 1200 @60Hz are achievable at 300m/1000ft. This is achievable by including a variable noise lter which overcomes issues introduced by increased gain as the length of the cable increases over 200m/650ft.

• Video compensation: A multi-pole compensation technique is used enable superb video quality at maximum distance over a single cable. For the first time, adjustment can be made for cable type and cable length with further color skew compensation and gain adjustment to ensure crystal clear images, all from the receiver’s keyboard.

• Local feed through port: A local feed through port is provided for audio and video so a local console can be used.

• USB powered transmitter: The transmitter is powered via the USB port to reduce the need for external power supplies. There is an option for an external power supply if the USB port has insufficient power.

• Dual user configuration: Two ADDERLinkTM X-USB PRO units can be linked to a single computer so two users can access the system. When using two sets of X-USB PRO modules to allow two users to access a single computer the arbitration between the users is handled by the USB sub- system of the computer. This means that both users can control the computer at exactly the same time and the resulting keyboard and mouse influences will be an amalgamation of the two inputs

• Emulated two page DDC EDID: This extender supports full two page DDC EDID. Some high performance video cards require the two page data or they will not deliver optimal performance.

• USB support: The X-USB PRO extends USB2.0 (low and full speed) allowing all USB compatible accessories (including isochronous devices) to be extended. The receiver unit has a built in 4 port USB hub to enable a complete desktop to be located remotely, including a keyboard, monitor, mouse, disk drive, ash memory stick, webcam, and any other device that would normally be plugged into your computer’s USB port.

• Audio: Audio transmission delivers CD quality stereo audio for speakers.

• Rack options: Both transmitter and receiver units can be used stand-alone or up to 16 units can be mounted into a 2U chassis.

• TEMPEST qualified and EAL4+ certified: Tempest certified design (USA NSTISSAM Level I and NATO SDIP-27 Level A), EAL4+ Common Criteria Evaluation Assurance Level 4 (augmented by ALC_ FLR.2 and ATE_DPT.2)
• Physical port identification: Channel switching is controlled only from the front panel buttons. No keyboard or mouse switching commands are permitted.  Two port and four port sizes are available as standard or enhanced <hyperlink to enhanced page> versions. 
• Smartcard Reader Sharing: The ADDERView SecureSwitch Analogue Enhanced product allows you to attach a smartcard reader that can be securely shared between the connected systems. This variant also contains anti-subversion features to guard against intrusion as well as authentication to verify that the unit is genuine.
• Hardwired port isolation: Data Diodes implemented within hard-wired electronic circuitry ensure unidirectional flow of critical data paths, safeguarding any compromised peripheral by preventing reading of information or transfer of data by another system. Peripherals are always powered down and re-initialized in the event of a change of channel, providing an additional of protection against hidden peripheral malware.

• No critical software reliance: Minimized use of software within the unit avoids the possibility of subversive reprogramming. One-time programmable storage replaces flash memory in all security critical areas of the device
• Designed for minimal emissions and isolation of electrical crosstalk: Electromagnetic emissions are reduced and transmission of signals to other computers are prevented due to extensive shielding of the outer casing and of internal circuitry.  External probing and unauthorized internal access are prevented through the unit design, with as few apertures as possible.

• TEMPEST qualified and EAL4+ certified: Tempest certified design (USA NSTISSAM Level I and NATO SDIP-27 Level A), EAL4+ Common Criteria Evaluation Assurance Level 4 (augmented by ALC_ FLR.2 and ATE_DPT.2)
• Physical port identification: Channel switching is controlled only from the front panel buttons. No keyboard or mouse switching commands are permitted.  Two port and four port sizes are available as standard or enhanced versions. 
• Hardwired port isolation: Data Diodes implemented within hard-wired electronic circuitry ensure unidirectional flow of critical data paths, safeguarding any compromised peripheral by preventing reading of information or transfer of data by another system. Peripherals are always powered down and re-initialized in the event of a change of channel, providing an additional of protection against hidden peripheral malware.

• No critical software reliance: Minimized use of software within the unit avoids the possibility of subversive reprogramming. One-time programmable storage replaces flash memory in all security critical areas of the device
• Designed for minimal emissions and isolation of electrical crosstalk:  Electromagnetic emissions are reduced and transmission of signals to other computers are prevented due to extensive shielding of the outer casing and of internal circuitry.  External probing and unauthorized internal access are prevented through the unit design, with as few apertures as possible.

• MultiScreen option: ADDERLink X50 MultiScreen (MS) adds a second video and transparent, High speed RS232 up to baud rates of 115,200 to enable extension of computers with dual monitors

• Fully transparent Low/Full speed USB: delivers the highest possible levels of USB compatibility through a unique USB communication method. Integrated 4 port hub to support all USB 1.1 and 2.0 Low/Full speed devices.

• High-performance video: industry leading video quality at high resolutions of 1920 x 1200 @ 60Hz over 50m (150ft)

• Video compensation: broad range of ultra smooth, fine adjustments to video picture

• True DDC Emulation: full supports 2-page Display Data Channel (DDC) ensuring all possible resolutions are supported

• Fully platform independent: support for all common hardware platforms, and their associated peripherals, through fully transparent USB connections

• Digital audio: click-less 44.1kHz CD-quality stereo audio without the need for an additional CATx cable, through Adder’s unique digital transmission of audio signals

• Dual Access: both a local video and audio output provided at the transmitter unit to enable local control of extended computers (USB devices can be plugged directly into the computer)

• Extended common mode input range: failsafe operation thanks to a special termination system, allowing the common mode range to be extended

• High density rack mount option: chassis houses up to 16 ADDERLink X50 units in 2U of rack space

• Fully transparent Low/Full speed USB: delivers the highest possible levels of USB compatibility through a unique USB communication method. Integrated 4 port hub to support all USB 1.1 and 2.0 Low/Full speed devices.

• High-performance video: industry leading video quality at high resolutions of 1920 x 1200 @ 60Hz over 50m (150ft)

• Video compensation: broad range of ultra smooth, fine adjustments to video picture

• True DDC Emulation: full supports 2-page Display Data Channel (DDC) ensuring all possible resolutions are supported

• Fully platform independent: support for all common hardware platforms, and their associated peripherals, through fully transparent USB connections

• Digital audio: click-less 44.1kHz CD-quality stereo audio without the need for an additional CATx cable, through Adder’s unique digital transmission of audio signals

• Dual Access: both a local video and audio output provided at the transmitter unit to enable local control of extended computers (USB devices can be plugged directly into the computer)

• Extended common mode input range: failsafe operation thanks to a special termination system, allowing the common mode range to be extended

• High density rack mount option: chassis houses up to 16 ADDERLink X50 units in 2U of rack space