ADDER RED-PSU PRO

Product title

ADDER® RED-PSU PRO

One liner

19 inch rack mountable power distribution unit with 8 or 16 outputs 12V30W redundant power supply.

Product description

ADDER® RED-PSU PRO provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED-PSU PRO delivers up to 16 power 12VDC outputs, hot swappable power modules and remote management.

• 8 or 16 port independently controllable
• 12V outputs
• 2 hot swappable power modules
• Controllable via secure HTTP interface
• REST API for 3rd party control integration
• 900,000hrs MTBF ratings on power modules
• 12V to 5V cable converters available for units with 5V power feeds

Product specifications part 1

Mains inputs
• 2x IEC 90-264VAC 47/63Hz input
• Efficiency 94% @50% load
• Power Factor 0.9 MIN typical

Peripheral connections
• 1x 8p8c for 10/100 Ethernet connection

Power
• 8 or 16x locking 3-pin DC connector, 12VDC 30W output.
• Each output is a Limited Power Source Service (LPS) to IEC 60950-1

Physical design
Compact case, robust metal construction
• Designed for 19 inch rack mounting
• (W)435mm/17.13” x (H)44mm/1.73” x (D)275mm/10.8”
• Weight: 4.5kg/9.9lbs

Operating conditions
• Temperature 0 to 50ºC/32 to 122ºF
• Humidity 10–95% Non condensing
• Altitude <2000Meters / 6500ft

Mean Time Between Failure (MTBF)
• PSU-REDPRO(x)-8 = 1,000,000hrs
• PSU-REDPRO(x)-16 = 600,000hrs
(Both units tested at 55°C ambient, 50% electrical stress, Telcordia SR-332 Issue 4)

• PSU-REDPRO-495W = 900,000hrs
(Tested at 55°C ambient, 80% Iout max, Telcordia Issue 3 Method 1 Case 3)

Local client requirements
Browser versions
• Internet Explorer™ 10,11
• Firefox™ 24 ESR and above
• Chrome™ 44 or above

Approvals
• CE/UKCA/FCC/ICES/cULus

Standards
• IEC/EN/UL 62368-1, EN55032, EN55035, EN61000-3-2, EN61000-3-3, CFR47 pt15a

Compliance
• REACH/RoHS/CAL PROP 65

Product features part 1

Power to match your needs
While individual Adder power adapters perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. ADDER® RED-PSU PRO (RED-PSU PRO) provides a significant step up in terms of efficiency, reliability and power management.

8 or 16 port power outputs with locking connectors
RED-PSU PRO is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 30W at 12V and each uses a locking connector to guard against accidental disconnection.

Hot swappable power modules
Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 495W power modules, which slot into the rear of the RED-PSU PRO chassis. A single power module is rated at 900,000 hrs MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation.

Protection
Power integrity, safety and management are core components of the RED-PSU PRO system. At start up, RED-PSU PRO enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device.

Web interface control
RED-PSU PRO can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information.

REST API
A REST (Representational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface.

12V to 5V converter for 5V products
Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED-PSU PRO, including the ADDERLink™ INFINITY range.

Product manual
What's in the box

1x RED-PSU PRO unit (To the specification in the ordering information)
1x country specific power cable
1x quick start guide

Ordering information

Redundant power supply units: (Pre-fitted with two removable power supplies)
PSU-REDPRO2-8-XX: 8-port power supply system*
PSU-REDPRO2-16-XX: 16-port power supply system*

Power supply units: (Pre-fitted with one removable power supply)
PSU-REDPRO1-8-XX: 8-port power supply*
PSU-REDPRO1-16-XX: 16-port power supply

*standard rack mount ears included

Ready for translation
Off
Product type
Product datasheets

ADDER Rackmount Kit RMK14

Product title

ADDER® Rackmount Kit RMK14

One liner

Rackmount kit for use with the ADDERView® Secure Flexi-Switch.

Product description

ADDER® Rackmount Kits are designed to enable easy installation within the rack environment.

The RMK14 is designed for use with the ADDERView® Secure Flexi-Switch.

Product categories
Ready for translation
Off
Product type

ADDER Rackmount Kit RMK13

Product title

ADDER® Rackmount Kit RMK13

One liner

Rackmount kit for the ADDERView® CCS-MV 4224 and ADDERView® Secure Desktop Switches

Banner image
Product description

ADDER® Rackmount Kits are designed to enable easy installation within the rack environment.

The RMK13 is a rackmount kit for use with the ADDERView® CCS-MV4224 and ADDERView® Secure Desktop Switches

Product categories
Ready for translation
Off
Product type

ADDER Rackmount Kit RMK4D-R2

Product title

ADDER Rackmount Kit RMK4D-R2

One liner

Rackmount kit suitable for ADDERLink® INFINITY®, ADDERView® CATx 1000 (8 and 16 port) and ADDERView CATxIP 5000

Product description

ADDER® Rackmount Kits are designed to enable easy installation within the rack environment.

The RMK4D-R2 is a 19" Rackmount 1U Kit for 2 units: ADDERLink® INFINITY®, ADDERView® CATx 1000 (8 and 16 port) and ADDERView CATxIP 5000.

Product categories
Product codes
Ready for translation
Off
Product type

ADDER DVA

Product title

ADDER DVA

One liner

VGA to DVI-D, USB powered, video converter

Banner image
Front image
Product diagram
Product description

ADDER® DVA is a high performance VGA to DVI-D video converter that transforms analog signals to digital. Placed in-line and USB powered this solution fits well with the AdderLink Infinity range of products.  It converts VGA signals, up to 1920 x 1200 @ 60Hz, into a DVI standard equivalent.

• Analog to digital video conversion up to 1920 x 1200 (165MHz max. pixel frequency)
• EDID management to ensure clean operation
• Adjustment control for alignment, tone, sharpness and brightness
• USB powered with USB feed through

Product specifications part 1

Hardware compatibility

All computers with VGA output

VGA input

The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz with pixel frequencies up to 165MHz

DVI Output

Conforms to the DVI 1.0 standard. Resolutions supported to a maximum of 1920 x 1200 @ 60Hz with pixel frequencies up to 165MHz

Software compatibility for VCP app

Windows 7 and above with .NET v3.5

Computer connections 

VGA DB15 x 1, USB type B x 1

Peripheral connections

DVI-D x 1, USB type A x 1

Physical design 

Compact case, robust metal construction. 55mm/2.16” (w), 25mm/1.0” (h), 70mm/2.75” (d), 0.1kg/0.2lbs. 

Power

USB powered – less than 300mA (1.5W)

Operating temperature 

0 to 40ºC / 32 to 104ºF

Approvals 

CE, FCC

Product features part 1

High quality VGA to DVI-D conversion

Adder DVA is a high quality VGA to DVI-D converter supporting most resolutions up to 1920 x 1200 @ 60Hz.

Auto calibration 

Adder DVA auto calibrates for horizontal and vertical position. Manual adjustment is also available through the Virtual Control Panel (VCP) app, if required.

EDID management

EDID management is a critical element in VGA/DVI-D conversion, to ensure the correct settings are passed to the computer’s graphics card.

USB powered with pass through 

Adder DVA requires no separate power adapter and instead draws less than 300mA in operation from a spare USB port on the computer. A USB pass-through port is made available on the Adder DVA to allow a low-powered USB device to be connected; thus, the same total number of USB ports remain available for other uses.

Flash upgradeable

Adder DVA is flash upgradeable, allowing custom EDID adjustment for non-standard operations. Upgrades are achieved via the USB port.

Virtual control panel app over DDC-CI

Adder DVA is supplied with a Virtual Control Panel (VCP) app which allows brightness, tone and sharpness to be adjusted. Vertical and horizontal video alignment can also be adjusted, where necessary. The VCP app contains a test pattern to accurately display the changes. EDID management options can also be changed and the EDID’s of the monitors can be displayed.

Product categories
Features
Product codes
DVA
Ordering information

Adder DVA: VGA to DVI-D converter

Ready for translation
Off
Product type
Product benefits

• Analog to digital video conversion up to 1920 x 1200 (165MHz max. pixel frequency)
• EDID management to ensure clean operation
• Adjustment control for alignment, tone, sharpness and brightness
• Adjustment control for alignment, tone, sharpness and brightness
• USB powered with USB feed through

Firmware updates
Product datasheets

ADDER RED-PSU

Product title

ADDER® RED-PSU

One liner

DISCONTINUED - This product is no longer manufactured

Banner image
Product diagram
Product description

This product has been replaced by a newer version, we recommend the latest version of this product for new projects - see ADDER RED-PSU PRO

Continued support on this product is still available to our existing customers, please contact our Support Team or your local Adder Office for more information.

 

The ADDER® Redundant Power Supply (RED-PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED-PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management.

  • Resilient: equipped with lockable power units which guard against accidental disconnection
  • Robust yet lightweight: small form factor, rack mountable device 1U
  • Ergonomically optimized: all cables and connections can be individually controlled remotely, removing potential points of failure and facilitating the maintenance of your equipment
  • Easy installation: dispense with the need for mains sockets and power distribution units (PDUs), reducing installation time

RESTful API Instructions: Click Here

Product specifications part 1

Approvals / Compliance

  • CE
  • FCC
  • UL

Environmental

Temperature: 0 to 50ºC / 32 to 122ºF

Humidity: 5 – 90% non condensing

Altitude: <2000Meters / 6500ft

MTBF: 500,000hrs at full load @50oC

Connectors – Local Unit

2 x IEC 90-264VAC 47/63Hz input

Efficiency 92%

Power Factor 0.99 typical

Connectors – Remote Unit

1x 8p8c for 10/100 Ethernet connection

Mechanical

Compact case, robust metal construction. Designed for 19 inch rack mounting: 435mm/17.13” (w), 44mm/1.73” (h), 275mm/10.8” (d), 4.5kg/9.9lbz

Power

8 or 16 x locking 3-pin DC connector, 12VDC 20W output. Each output is a Limited Power Service (LPS) to IEC 60950-1

Software

Browser versions

Internet Explorer® 10,11

Firefox 24 ESR and above Chrome 43

Product features part 1
  • Secure connection: HTTP digest authentication (RFC 2617) ensure web security,  requiring username and password
  • Power integrity: a central microprocessor manages the output of power and ensure power consistency to the multiple devices
  • Adaptable to suit your needs: available in 8 or 16 ports, limited at 20 Watts at 12V
  • Integrated redundancy: removes single points of failure, increasing the reliability of your installation
  • Remotely manage your devices: monitor, troubleshoot and power on and off your devices from your desk
Product categories
Product manual
Ordering information

Redundant power supply units pre-fitted with two removable power supplies

PSU-RED2-8-XX: 8-port power supply system*

PSU-RED2-16-XX: 16-port power supply system*

 

Power supply units pre-fitted with one removable power supply

PSU-RED1-8-XX: 8-port power supply system*

PSU-RED1-16-XX: 16-port power supply system*

 

*standard rack mount ears included

 

XX = Mains Lead Country Code:

UK = United Kingdom
US = United States
EURO = Europe
JP = Japan
CH = China

Ready for translation
Off
Product benefits
  • Resilient: equipped with lockable power units which guard against accidental disconnection
  • Robust yet lightweight: small form factor, rack mountable device 1U
  • Ergonomically optimized: all cables and connections can be individually controlled remotely, removing potential points of failure and facilitating the maintenance of your equipment
  • Easy installation: dispense with the need for mains sockets and power distribution units (PDUs), reducing installation time
Product datasheets
3 Unique Identifiers

ADDER VSCD12 HDMI Cable

Product title

ADDER VSCD12 HDMI Cable

One liner

HDMI to HDMI cable with locking connectors.

Banner image
Front image
Back image
Product description

2m - HDMI to HDMI cable with locking connectors.

Product specifications part 1

Connectors

2 x HDMI Locking

Options

VSCD12: 2m/6ft.

Product categories
Features
Product codes
Ready for translation
Off
Product type

ADDER VSC24 USB Cable

Product title

ADDER VSC24 USB Cable

One liner

USB A to B cable

Banner image
Front image
Back image
Product description

USB A to B cable

Product specifications part 1

Connectors

USB A to B cable

Options

VSC24: 2m

Product categories
Product codes
Associated products
Ready for translation
Off
Product type

ADDER VSCD3/VSCD4 DVI-D/USB Cable

Product title

ADDER VSCD3/VSCD4 DVI-D/USB Cable

One liner

DVI-D Dual link & USB video cable.

Banner image
Front image
Back image
Product specifications part 1

Connectors

2 x DVI-D, 2 x USB (A & B)

Options

VSCD3: 2m/6ft.
VSCD4: 5m/16ft.

Product categories
Product codes
Ready for translation
Off
Product type

ADDER VSCD10A DisplayPort Cable

Product title

ADDER VSCD10A DisplayPort™ Cable

One liner

DisplayPort to DisplayPort cable.

Banner image
Front image
Back image
Product specifications part 1

Connectors

2 x DisplayPort

Options

VSCD10A: 2m/6ft.

Product categories
Product codes
Associated products
Ready for translation
Off
Product type