Power to match your needs
While individual Adder power adapters perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. ADDER® RED-PSU PRO (RED-PSU PRO) provides a significant step up in terms of efficiency, reliability and power management.

8 or 16 port power outputs with locking connectors
RED-PSU PRO is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 30W at 12V and each uses a locking connector to guard against accidental disconnection.

Hot swappable power modules
Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 495W power modules, which slot into the rear of the RED-PSU PRO chassis. A single power module is rated at 900,000 hrs MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation.

Protection
Power integrity, safety and management are core components of the RED-PSU PRO system. At start up, RED-PSU PRO enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device.

Web interface control
RED-PSU PRO can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information.

REST API
A REST (Representational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface.

12V to 5V converter for 5V products
Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED-PSU PRO, including the ADDERLink™ INFINITY range.

Flexible and scalable: Each XDIP unit can be configured as a simple extender, distributed KVM switch or for AV distribution. Each receiver can see up to 16 sources and each transmitter can connect to up to 256 receivers.

Configurable units: The XDIP user and computer units are identical and can be configured as a transmitter or receiver. This means the solution can be built to suit the application, and should the application change, units can be re-configured to suit.

High quality video: The XDIP supports video resolutions of up to 1920 x 1200 @ 60Hz.

Power over Ethernet (PoE): Compatible with most PoE switches, the XDIP can be easily installed without the need for additional power. Many PoE switches offer redundant power options which the XDIP can leverage for enhanced reliability. 

Remote control: Users can remotely control their XDIP network via a RESTful API or HTTPS web browser. By managing the receiver end points through an API, users can control the matrix. The XDIP is designed to work with any third party controller via HTTPS.

Extension distance: Extension distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances can be achieved by routing through IP infrastructure. 

Audio capability: XDIP delivers bi-directional analog audio  (16-bit sampling at 48kHz) passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).

Plug and Play: The XDIP is delivered in a zero config. state so it works, without the need for drivers or software, as soon as it is connected. A simple setup wizard guides the user through set up when the device is connected.

• Secure connection: HTTP digest authentication (RFC 2617) ensure web security,  requiring username and password

• Power integrity: a central microprocessor manages the output of power and ensure power consistency to the multiple devices

• Adaptable to suit your needs: available in 8 or 16 ports, limited at 20 Watts at 12V

• Integrated redundancy: removes single points of failure, increasing the reliability of your installation

• Remotely manage your devices: monitor, troubleshoot and power on and off your devices from your desk

• Multi-view on-screen thumbnail display: provides users with a live preview of permitted computers direct on their screen
• Choice of connection modes: the user can chose between Exclusive mode, which provides full KVM control while being able to share video content with other colleagues; or Private mode, when users want to work in private
• Intuitive web interface: users have personal logins, whilst system administrators can securely access the management tools to configure system settings, set access privileges and control video connections
• In-built security measures: the web interface is secured using HTTPS, administrators must login each time they connect, and an API enables switch control from a 3rd party control system
• Lossless HD video support: delivers lossless HD video at resolutions of up to 1920 x 1200 at 60Hz providing a real-time, ‘at the PC’ experience
• Multi-head video support: DDX® transmitters (CAMs) & receivers (USRs) offer multi-head video support and can be grouped to form ‘Computers’ and ‘Consoles’ that support dual-head & quad-head connectivity
• USB True Emulation: USB 2.0 enables connection to any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers
• Robust yet lightweight: small form factor, rack mountable device

A computer access module is a small device used to connect the required output ports of a computer to a standard CAT5e, CAT6 or CAT7 cable. The unit sits inline and does not require any additional power to operate, instead sourcing its. The main body is constructed from a tough ABS material which houses the RJ45 connector.  From this main body, one or more connections can be made into the rear of your target computer/server.

All ADDER CAMs use Adder Keep Alive technology to ensure that the keyboard and mouse inputs to the computer remain active, even when the particular channel is not selected. This action ensures that there are no connection delays or problems as the port is selected. 

• RealVNC server with RFB 3.3 support: up to four users can remotely and securely access computers outside your network, with the possibility of creating sixteen user profiles with defined access rights

• High performance video over VNC: RealVNC enables video resolutions of up to 1600x1200, as it is free of the limitations of HTTPS

• USB and Virtual media support: engineered to act as a conduit through which data can be passed so that files can be transferred via IP onto the ipeps and onto the target computer by means of a USB virtual media port

• Choice of power source: can be powered from two USB cables or independently from an external 5V power source

• Independent operation: maintain full control even during boot up, BIOS level or computer crash states, it will even work even if the controlled devices are not operational

• ADDER.NET Enterprise Management Software: provides a centralised, secure and intuitive user access management interface, where up to sixteen user profiles with defined access rights can be created

• Dual access: the unit can be accessed by one local user, in addition to four remote users at any one time

• RealVNC server: up to four users can remotely and securely access computers outside your network, with the possibility of creating sixteen user profiles with defined access rights

• High performance video over VNC: Real VNC enables video resolutions of up to 1600x1200

• USB and Virtual media support: engineered to act as a conduit through which data can be passed so that files can be transferred via IP onto the ipeps and onto the target computer by means of a virtual media port

• Choice of power source: can be powered from two PS2 or USB cables or independently from an external 5V power source

• Independent operation: maintain full control even during boot up, BIOS level or computer crash states, it will even work even if the controlled devices are not operational

• ADDER.NET Enterprise Management Software: provides a centralised, secure and intuitive user access management interface, where up to sixteen user profiles with defined access rights can be created

• Easy on screen display driven set up and configuration

• Enterprise grade security (using AES 128 bit encryption and RSA 2048 bit public key authentication) with 16 user profiles and access data logging

• Includes rack mount kits

• Supports exclusive access mode or up to four simultaneous connections

• Modem port and 10/100 Mb Ethernet port for dialup and/or IP network access

• Power control functions supported via dedicated serial port

• Choice of 8 or 16 ports

• DDC support

• Compatible with all major O/S