• Multiscreen: replicating the exact content shown on the local monitor
• Digital-quality video: VGA resolutions of up to 1920 x 1200 @60Hz are achievable at 300m (1000ft). Variable noise filter for extension in excess of 200m
• Video compensation: Multi-pole compensation technique enables uncompromised video quality at maximum distance over a single cable. Color skew compensation and gain adjustment controlled from the receiver’s keyboard to ensure crystal clear images
• Local feed through port: for audio and video, enabling a local console to be used
• USB powered transmitter: reduces the need for external supplies, with external power supply in place as backup

• Dual user configuration: Two X-USB PRO units linked to the USB sub-system of a single computer enables two users to access the system simultaneously
• Emulated two page DDC EDID: Support for full two page Display Data Channel Extended Display Identification Data which enables the remote system to exactly mirror the data coming from the source monitor
• USB support: Low and Full speed USB extension supporting all USB compatible accessories (including isochronous devices). 4 port USB hub within the receiver unit enables a complete desktop to be located remotely, including support for keyboard, monitor, mouse, disk drive, flash memory stick, webcam, and any other device USB device.
• Audio transmission: delivers CD quality stereo audio for speakers
• Rack options: Both transmitter and receiver units can be used stand-alone or up to 16 units can be mounted into a 2U chassis

Video performance

Full HD 1080p, 1080i & 720p 
Distances up to 150m (500ft)

Line power for simplicity

To help reduce cable clutter, the ADDERLink LPV150 has been designed to be powered by a USB port on your computer. Furthermore, this power is also transmitted alongside the video over the CATx cable, in turn powering your receiver unit.

4-way transmitter for point-to-multipoint

The ALPV154T is able to take the same HD input and send it to 4 different screens connected via the ALPV150R receivers. There is a feed through port on the unit to allow a local display or you can cascade another ALAV154T so you can supply 8 screens.

Video sharpness adjustment 

The remote module has a video adjustment screw to control picture sharpness on the display screen.

Absolute simplicity 

Getting into professional digital signage has never been so easy. Simply plug the transmitter's VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you're finished. Now start delivering your message to customers, clients, staff or whoever you wish.

Advanced EDID cloning

The ADDERLink LPV enables the user to clone the EDID (Extended Display Identification Data) from a display or use a default EDID. This approach enables the widest possible compatibility whilst also providing a plug and play experience for most applications.

Rack mountable

The LPV154T units are rack mountable at high density using the AdderLink rack mount chassis.

Fit and forget 

Adder digital signage products are the professional choice because they give you the ability to deliver, fit and forget installations. The LPV is no exception.

• Digital like video: VGA resolutions of 1920 x 1200 @60Hz are achievable at 300m/1000ft. This is achievable by including a variable noise lter which overcomes issues introduced by increased gain as the length of the cable increases over 200m/650ft.

• Video compensation: A multi-pole compensation technique is used enable superb video quality at maximum distance over a single cable. For the first time, adjustment can be made for cable type and cable length with further color skew compensation and gain adjustment to ensure crystal clear images, all from the receiver’s keyboard.

• Local feed through port: A local feed through port is provided for audio and video so a local console can be used.

• USB powered transmitter: The transmitter is powered via the USB port to reduce the need for external power supplies. There is an option for an external power supply if the USB port has insufficient power.

• Dual user configuration: Two ADDERLinkTM X-USB PRO units can be linked to a single computer so two users can access the system. When using two sets of X-USB PRO modules to allow two users to access a single computer the arbitration between the users is handled by the USB sub- system of the computer. This means that both users can control the computer at exactly the same time and the resulting keyboard and mouse influences will be an amalgamation of the two inputs

• Emulated two page DDC EDID: This extender supports full two page DDC EDID. Some high performance video cards require the two page data or they will not deliver optimal performance.

• USB support: The X-USB PRO extends USB2.0 (low and full speed) allowing all USB compatible accessories (including isochronous devices) to be extended. The receiver unit has a built in 4 port USB hub to enable a complete desktop to be located remotely, including a keyboard, monitor, mouse, disk drive, ash memory stick, webcam, and any other device that would normally be plugged into your computer’s USB port.

• Audio: Audio transmission delivers CD quality stereo audio for speakers.

• Rack options: Both transmitter and receiver units can be used stand-alone or up to 16 units can be mounted into a 2U chassis.

Resolutions and cable lengths

The maximum resolutions achievable are: 
1920 x 1200 @ 60Hz at 100m. 
1600 x 1200 @ 60Hz at 200m.
1280 x 1024 @ 60Hz at 300m.

Audio

Two channel CD quality audio is supported.

Absolute mouse mode support

Supports absolute mouse mode when used in conjunction with supporting equipment.

EDID display information

The module contains a default set of EDID information that supports display resolutions up to 1920 x 1200 @ 60Hz. In addition, the module will check during power up whether alternative EDID information is available from the KVM switch or extender that is connected to port A. If required, you can also harvest and store new EDID information from your display (Read and Store).

Power

The CATx Dual CAM uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 300mA.

User arbitration

Control of the host computer is arbitrated by the module on a first come, first served basis. At the moment that a key is pressed or a mouse is moved by a user, the keyboard and mouse of the other user are temporarily locked-out (the video images remain). The keyboard indicators of the locked-out user then begin to flash to confirm their status. After two seconds of inactivity from the user currently in control, the module returns to its idle condition and re-instates the keyboard indicators of the locked-out user.

RS232 for disabling/re-enabling receiver connections 

When required, a user of one remote link can disable (and re-enable) the other remote link using serial port commands.

From one of the remote keyboards, a terminal program on the computer can be used to send the appropriate character to the COM port that has been allocated to the module.

A computer access module is a small device used to connect the required output ports of a computer to a standard CAT5e, CAT6 or CAT7 cable. The unit sits inline and does not require any additional power to operate, instead sourcing its. The main body is constructed from a tough ABS material which houses the RJ45 connector.  From this main body, one or more connections can be made into the rear of your target computer/server.

All ADDER CAMs use Adder Keep Alive technology to ensure that the keyboard and mouse inputs to the computer remain active, even when the particular channel is not selected. This action ensures that there are no connection delays or problems as the port is selected. 

Video performance 

Full HD 1080p, 1080i & 720p
Distances up to 150m (500ft)

Line power

To help reduce cable clutter, the ADDERLink LPV has been designed to be powered by a USB port on your computer. What’s more though, is that this power is also transmitted alongside the video over CATx cable, in turn powering your receiver unit.

Absolute simplicity

Getting into professional digital signage hasnever been so easy. Simply plug the transmitters VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you’re finished. Now start delivering your message to customers, clients, staff or who ever you wish.

Advanced DDC Protocol

Unless an extender actively supports DDC (Display Data Channel), some well-known high performance video cards cannot be used at high resolutions. The ADDERLink LPV fully supports DDC.

Fit and forget

ADDER digital signage products are the professional choice because they give you the ability to deliver, fit and forget installations. The LPV is no exception. Rigorously tested in ADDER’s technology labs, so you can buy with real confidence.

Targeted Messages

Targeting messages to specific areas of your business is perfectly simple too. By using a multihead graphics card, you can deliver different messages around your installation with minimal additional investment.

Video sharpness adjustment

The remote module has a video adjustment skew to control picture sharpness on the display screen.

Choosing your signage technology

There are many types of signage technology available on the market, from small players which sit alongside the screen to streaming MPEG around large high bandwidth networks. ADDER’s solution is based upon reliability, quality and simplicity. The three qualities most requested by professional users. 

Delivery of content over CATx cable is by far the simplest and safest way to deliver your message, requiring minimal disruption to install, CATx cable can be routed invisibly to your screens.

There is often a huge amount of mystery surrounding digital signage technology, acronyms designed to make technologies seem more than they are, and terms used specifically to make users believe they are buying into something new. The reality is, you probably have the technology already to deliver a simple digital signage system. Basically, all you need is a computer, a screen and a way to join the two together. Line extension solutions simply allow you to keep everything tidy and easy to use by locating the computer almost anywhere you like.

• MultiScreen option: ADDERLink X50 MultiScreen (MS) adds a second video and transparent, High speed RS232 up to baud rates of 115,200 to enable extension of computers with dual monitors

• Fully transparent Low/Full speed USB: delivers the highest possible levels of USB compatibility through a unique USB communication method. Integrated 4 port hub to support all USB 1.1 and 2.0 Low/Full speed devices.

• High-performance video: industry leading video quality at high resolutions of 1920 x 1200 @ 60Hz over 50m (150ft)

• Video compensation: broad range of ultra smooth, fine adjustments to video picture

• True DDC Emulation: full supports 2-page Display Data Channel (DDC) ensuring all possible resolutions are supported

• Fully platform independent: support for all common hardware platforms, and their associated peripherals, through fully transparent USB connections

• Digital audio: click-less 44.1kHz CD-quality stereo audio without the need for an additional CATx cable, through Adder’s unique digital transmission of audio signals

• Dual Access: both a local video and audio output provided at the transmitter unit to enable local control of extended computers (USB devices can be plugged directly into the computer)

• Extended common mode input range: failsafe operation thanks to a special termination system, allowing the common mode range to be extended

• High density rack mount option: chassis houses up to 16 ADDERLink X50 units in 2U of rack space

• Fully transparent Low/Full speed USB: delivers the highest possible levels of USB compatibility through a unique USB communication method. Integrated 4 port hub to support all USB 1.1 and 2.0 Low/Full speed devices.

• High-performance video: industry leading video quality at high resolutions of 1920 x 1200 @ 60Hz over 50m (150ft)

• Video compensation: broad range of ultra smooth, fine adjustments to video picture

• True DDC Emulation: full supports 2-page Display Data Channel (DDC) ensuring all possible resolutions are supported

• Fully platform independent: support for all common hardware platforms, and their associated peripherals, through fully transparent USB connections

• Digital audio: click-less 44.1kHz CD-quality stereo audio without the need for an additional CATx cable, through Adder’s unique digital transmission of audio signals

• Dual Access: both a local video and audio output provided at the transmitter unit to enable local control of extended computers (USB devices can be plugged directly into the computer)

• Extended common mode input range: failsafe operation thanks to a special termination system, allowing the common mode range to be extended

• High density rack mount option: chassis houses up to 16 ADDERLink X50 units in 2U of rack space