ADDER RED-PSU PRO

Product title

ADDER® RED-PSU PRO

One liner

19 inch rack mountable power distribution unit with 8 or 16 outputs 12V30W redundant power supply.

Product description

ADDER® RED-PSU PRO provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED-PSU PRO delivers up to 16 power 12VDC outputs, hot swappable power modules and remote management.

• 8 or 16 port independently controllable
• 12V outputs
• 2 hot swappable power modules
• Controllable via secure HTTP interface
• REST API for 3rd party control integration
• 900,000hrs MTBF ratings on power modules
• 12V to 5V cable converters available for units with 5V power feeds

Product specifications part 1

Mains inputs
• 2x IEC 90-264VAC 47/63Hz input
• Efficiency 94% @50% load
• Power Factor 0.9 MIN typical

Peripheral connections
• 1x 8p8c for 10/100 Ethernet connection

Power
• 8 or 16x locking 3-pin DC connector, 12VDC 30W output.
• Each output is a Limited Power Source Service (LPS) to IEC 60950-1

Physical design
Compact case, robust metal construction
• Designed for 19 inch rack mounting
• (W)435mm/17.13” x (H)44mm/1.73” x (D)275mm/10.8”
• Weight: 4.5kg/9.9lbs

Operating conditions
• Temperature 0 to 50ºC/32 to 122ºF
• Humidity 10–95% Non condensing
• Altitude <2000Meters / 6500ft

Mean Time Between Failure (MTBF)
• PSU-REDPRO(x)-8 = 1,000,000hrs
• PSU-REDPRO(x)-16 = 600,000hrs
(Both units tested at 55°C ambient, 50% electrical stress, Telcordia SR-332 Issue 4)

• PSU-REDPRO-495W = 900,000hrs
(Tested at 55°C ambient, 80% Iout max, Telcordia Issue 3 Method 1 Case 3)

Local client requirements
Browser versions
• Internet Explorer™ 10,11
• Firefox™ 24 ESR and above
• Chrome™ 44 or above

Approvals
• CE/UKCA/FCC/ICES/cULus

Standards
• IEC/EN/UL 62368-1, EN55032, EN55035, EN61000-3-2, EN61000-3-3, CFR47 pt15a

Compliance
• REACH/RoHS/CAL PROP 65

Product features part 1

Power to match your needs
While individual Adder power adapters perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. ADDER® RED-PSU PRO (RED-PSU PRO) provides a significant step up in terms of efficiency, reliability and power management.

8 or 16 port power outputs with locking connectors
RED-PSU PRO is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 30W at 12V and each uses a locking connector to guard against accidental disconnection.

Hot swappable power modules
Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 495W power modules, which slot into the rear of the RED-PSU PRO chassis. A single power module is rated at 900,000 hrs MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation.

Protection
Power integrity, safety and management are core components of the RED-PSU PRO system. At start up, RED-PSU PRO enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device.

Web interface control
RED-PSU PRO can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information.

REST API
A REST (Representational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface.

12V to 5V converter for 5V products
Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED-PSU PRO, including the ADDERLink™ INFINITY range.

Product manual
What's in the box

1x RED-PSU PRO unit (To the specification in the ordering information)
1x country specific power cable
1x quick start guide

Ordering information

Redundant power supply units: (Pre-fitted with two removable power supplies)
PSU-REDPRO2-8-XX: 8-port power supply system*
PSU-REDPRO2-16-XX: 16-port power supply system*

Power supply units: (Pre-fitted with one removable power supply)
PSU-REDPRO1-8-XX: 8-port power supply*
PSU-REDPRO1-16-XX: 16-port power supply

*standard rack mount ears included

Ready for translation
Off
Product type
Product datasheets

ADDER CCS-XB

Product title

ADDER CCS-XB

One liner

LED Light Module designed to indicate active screen focus when used alongside Free-Flow.

 

Banner image
Product diagram
Product description

The CCS-XB illumination module is an accessory which connects to the CCS4-USB. It gives the users the option to have an LED indicator positioned on each screen to identify which screen you are currently controlling. The colour and intensity can be controlled for each screen. A maximum of 10 illumination indicators can be supported. 
 

Product specifications part 1

Hardware compatibility

For use with CCS4-USB devices with firmware 2.0 or above

Connection to CCS4:
10p10c connector via cable VSC46

Connections to Desk:
10 x 6P6C connecters for the CCS-LED modules
1 x 10P10C connector for upgrade cable or remote control RC4 4-button switch

Physical design
Robust metal construction. 95mm/3.7” (w), 30mm/1.2” (h), 65mm/2.6” (d), 0.22kg/1.65lbs.

Operating temperature
0 to 40ºC / 32 to 104ºF

Approvals
CE, FCC

Product features part 1

Add-on module for use with CCS4USB and Free-Flow. This module controls a set of LED lights which mount onto your screens. The LED's are fully configurable allowing the user to assign a specified color and intensity via the setup application. These units provide loop through support for additional accessories such as the RC4 or RC8 remote control modules for greater flexibility. Each LED module is pre-wired with 3 metres of cable allowing the user to route the module discreatly to the screen. The flexible cable used is of oval profile making it easier to tuck into channeling, wall gaps or any similar room features.

Each LED is housed in a sturdy molded enclosure and provided with an adhesive pad allowing the module to be fixed onto a screen bezel or other surface as required. 

The CCS-XB is interface powered making installation very simple.

Each CCS-XB ships with 4 LED modules. Additional modules can be ordered (to a maximum of 10 per unit) using order code: CCS-LED

Product categories
Features
Product codes
Product manual
Case studies
Ready for translation
Off
3 Unique Identifiers
  • Connects to CCS4-USB
  • Provides screen identification LEDs
  • Maximum of 10 illumination indicators

ADDER CATx DisplayPort CAM

Product title

ADDER CATx DisplayPort CAM

One liner

DisplayPort, Mini DisplayPort, USB and Audio Computer Access Module

Banner image
Product description

The CATX DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. TheCAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the AdderView® CATx KVM switches and/or Adder extender receivers (either AdderLink® X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are then all linked to the remote device.

Product specifications part 1

Maximum Video Resolution

1920 x 1200

Extension Distance

1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.

O/S Compatability

Operating system independent

Connectors

Display Port version:
1 x Display Port;
1 x USB- Type A plug;
1 x 3.5 mm jack plug and 1 x RJ45.

Mini Display port Version:
1 x Mini Display Port;
1 x USB- Type A plug;
1 x 3.5 mm jack plug and 1 x RJ45

Physical design

Local: Hi Impact resistance ABS, 45mm /1.75’’ (w) x 75mm / 3’’(d) x 25mm / 1’’ (h) with 300mm/12’’ flying leads Weight 100g / 0.2 lb

Power

USB powered device Max 500mA @ 5V

Operating temperature

0ºC to 40º / 32ºF to 104ºF

Approvals

CE, FCC

Product features part 1

Resolutions and cable lengths

The maximum resolutions achievable are:
1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.

Power

The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector

Mini DisplayPort version available

Some computers, servers and graphics cards (Apple Mac Pro and ATI Radion graphics cards) come with mini DisplayPort connectors as these are smaller than the standard connector. A version of the CAM is available with Mini DisplayPort connectors.

EDID display information

The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer.

USB

The CAM supports low speed (1Mb/s) HID USB devices only.

Audio

2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.

Product categories
Product codes
Ordering information

DisplayPort CAM with USB & Audio: CATX-DP-USBA

Mini DisplayPort CAM with USB & Audio: CATX-MDP-USBA

Ready for translation
Off
3 Unique Identifiers
  • Ext. DP equipped computers using CATx up to 300m
  • Resolution: Up to 1920x1200@60Hz
  • Compatible with ADDERview CATx KVM switches or ADDERLink X100 or X200
Weight
1

ADDER CATx CONSOLE Serial Computer Access Module

Product title

ADDER CATx CONSOLE Serial CAM

One liner

New to the ADDER® CAM range is the ADDER CATx CONSOLE Serial CAM, giving you serial connectivity to your target machines

Banner image
Front image
Back image
Product description

The ADDER® CATx CONSOLE Serial CAM provides serial connectivity to your target machines. Serial interfaces can be used for server control or power control where serial configuration is available.

The ADDER CATx CONSOLE Serial CAM only works from the ADDERView CATxIP 5000. Used in conjunction with the ADDERView® CATxIP 5000, it can be used as a serial console (sometime known as a terminal server). This gives you out of band access to target command line interface (CLI) as well as console access to network switches.

Product specifications part 1

Connector

D-Sub 9-way female

 

Product features part 1

Green Indicator

Power present

Yellow Indicator

Signal activity

Product categories
Product codes
Product brochures
Ordering information

CATX-CONSOLE

Ready for translation
Off
Product type
Product datasheets
3 Unique Identifiers
  • Provides serial connectivity to target machines
  • Compatible with ADDERView CATxIP 5000
  • Delivers out of bound access to CLI and console access to network switches

ADDER CATx Dual CAM

Product title

ADDER CATx Dual CAM

One liner

Share a single computer between two sets of peripheral devices

Banner image
Product description

The CATx Dual Computer Access Modules (CAMs) are highly compact devices that allow you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems.

The module connects to the video, USB, audio and RS232 ports of your computer and then connects via CAT 5, 5e or 6 cabling to the ADDERView® CATx KVM switches and/or ADDER extender receivers (either ADDERLink® X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are linked to the remote devices.

The CATX-USB-DA variant is not fitted with audio or serial ports but is otherwise identical to the CATX-USBA-DA model.

Product specifications part 1

Video resolution

Maximum of 1920 x 1200 @ 60Hz

Extension distance

1920 x 1200 @ 60Hz at 100m. 
1600 x 1200 @ 60Hz at 200m.
1280 x 1024 @ 60Hz at 300m.

O/S compatibility

Operating system independent

Connectors

CATX-USB-DA:
USB Type A, D type 15 pin male (video)

CATX-USBA-DA:
As CATX-USB-DA but also including; 3.5mm male audio jack, D type 9pin female (RS232), and two RJ45 ports

Physical design 

ABS moulded plastic.
70mm (H), 52mm (W), 25mm (D).

Power

USB powered ( Max 300mA @5V DC)

Operating temperature 

0 - 40 deg C

Approvals 

CE, FCC

Product features part 1

Resolutions and cable lengths

The maximum resolutions achievable are: 
1920 x 1200 @ 60Hz at 100m. 
1600 x 1200 @ 60Hz at 200m.
1280 x 1024 @ 60Hz at 300m.

Audio

Two channel CD quality audio is supported.

Absolute mouse mode support

Supports absolute mouse mode when used in conjunction with supporting equipment.

EDID display information

The module contains a default set of EDID information that supports display resolutions up to 1920 x 1200 @ 60Hz. In addition, the module will check during power up whether alternative EDID information is available from the KVM switch or extender that is connected to port A. If required, you can also harvest and store new EDID information from your display (Read and Store).

Power

The CATx Dual CAM uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 300mA.

User arbitration

Control of the host computer is arbitrated by the module on a first come, first served basis. At the moment that a key is pressed or a mouse is moved by a user, the keyboard and mouse of the other user are temporarily locked-out (the video images remain). The keyboard indicators of the locked-out user then begin to flash to confirm their status. After two seconds of inactivity from the user currently in control, the module returns to its idle condition and re-instates the keyboard indicators of the locked-out user.

RS232 for disabling/re-enabling receiver connections 

When required, a user of one remote link can disable (and re-enable) the other remote link using serial port commands.

From one of the remote keyboards, a terminal program on the computer can be used to send the appropriate character to the COM port that has been allocated to the module.

Product categories
Product codes
Ordering information

Dual CAM: CATX-USB-DA

Dual CAM with audio: and RS232 CATX-USBA-DA

Ready for translation
Off
Product type
Product datasheets
3 Unique Identifiers
  • Combined video splitter and peripheral hub
  • Resolution: Up to 1920x1200@60Hz
  • Compatible with ADDERview CATx KVM switches or ADDERLink X100 or X200

ADDER CATx SUN Computer Access Module

Product title

ADDER CATx SUN CAM

One liner

CAMs (Computer Access Modules) are used in conjunction with the ADDER® CATx KVM and Extender products to connect to a range of machine types.

Banner image
Front image
Product description

CAMs allow the user to connect multiple different machine platforms to an Adder CATx switch or KVM extender. The CATX-SUN Computer access module (CAM) is used to connect to SUN PC's over a switch or connect via an extender.

  • Easy plug and play operation
  • Self powered 
  • Compatible with all adder CATx devices
Product features part 1

A computer access module is a small device used to connect the required output ports of a computer to a standard CAT5e, CAT6 or CAT7 cable. The unit sits inline and does not require any additional power to operate, instead sourcing its. The main body is constructed from a tough ABS material which houses the RJ45 connector.  From this main body, one or more connections can be made into the rear of your target computer/server.

All ADDER CAMs use Adder Keep Alive technology to ensure that the keyboard and mouse inputs to the computer remain active, even when the particular channel is not selected. This action ensures that there are no connection delays or problems as the port is selected. 

Product categories
Product codes
Ordering information

CATX-SUNA: Computer Access Module, RJ45 Socket- Sun 8 Pin, VGA and Audio (out)

Ready for translation
Off
Product type
Product benefits
  • Easy plug and play operation
  • Self powered 
  • Compatible with all adder CATx devices
3 Unique Identifiers
  • Connect multiple machine platforms to an Adder CATx switch or KVM extender
  • Connect to SUN PCs over a switch or connect via an extender
  • Self powered

ADDER CATx USB Computer Access Module

Product title

ADDER CATx USB CAM

One liner

CAMs (Computer Access Modules) are used in conjunction with the ADDER® CATx KVM and Extender products to connect to a range of machine types.

Banner image
Front image
Back image
Product description

CAMs allow the user to connect multiple different machine platforms to an Adder CATx switch or KVM extender. The CATX-USB/USBA Computer Access Module (CAM) allows connections to machines with, VGA, Audio and USB ports.

Product features part 1

A computer access module is a small device used to connect the required output ports of a computer to a standard CAT5e, CAT6 or CAT7 cable. The unit sits inline and does not require any additional power to operate, instead sourcing its. The main body is constructed from a tough ABS material which houses the RJ45 connector.  From this main body, one or more connections can be made into the rear of your target computer/server.

All ADDER CAMs use Adder Keep Alive technology to ensure that the keyboard and mouse inputs to the computer remain active, even when the particular channel is not selected. This action ensures that there are no connection delays or problems as the port is selected. 

Product codes
Ordering information

CATX-USB: Computer Access Module, RJ45Socket - USB and VGA

CATX-USBA: Computer Access Module, RJ45Socket - USB, VGA and Audio (out)

Ready for translation
Off
Product type
3 Unique Identifiers
  • Connect multiple machine platforms to an Adder CATx switch or KVM extender 
  • Allows connections to machines with VGA, audio and USB ports

ADDER CATx PS2 Computer Access Module

Product title

ADDER CATx PS2 CAM

One liner

CAMs (Computer Access Modules) are used in conjunction with the ADDER® CATx KVM and Extender products to connect to a range of machine types.

Banner image
Front image
Back image
Product diagram
Product description

CAMs allow the user to connect multiple different machine platforms to an Adder CATx switch or KVM extender. The ADDER® CATx PS2/PS2A Computer Access Module (CAM) allows connections to machines with, VGA, Audio and PS2 ports. 

Product features part 1

A computer access module is a small device used to connect the required output ports of a computer to a standard CAT5e, CAT6 or CAT7 cable. The unit sits inline and does not require any additional power to operate, instead sourcing its. The main body is constructed from a tough ABS material which houses the RJ45 connector.  From this main body, one or more connections can be made into the rear of your target computer/server.

All ADDER CAMs use Adder Keep Alive technology to ensure that the keyboard and mouse inputs to the computer remain active, even when the particular channel is not selected. This action ensures that there are no connection delays or problems as the port is selected. 

Product categories
Product codes
Ordering information

CATX-PS2: Computer Access Module RJ45 Socket- PS2 and VGA

CATX-PS2A: Computer Access Module RJ45 Socket- PS2 and VGA (out)

Ready for translation
Off
Product type
3 Unique Identifiers
  • Connect multiple machine platforms to an Adder CATx switch or KVM extender
  • Allows connections to machines with VGA, audio and PS2 ports