DISCONTINUED - Professional 2 port AV transmitter with RS232 & USB power


This product is now discontinued, but details are still available for information only.

The ALAV102T is a highly compact AV transmitter that allow you to deliver professional quality AV content to ALAV100 series receivers.

The module connects to the video, USB, audio and RS232 ports of your computer and then connects via CAT 5, 5e or 6 cabling to the ALAV100 receivers, each of which can be located up to 300 meters from the module.

ALAV102T features RS232 control allowing you to switch nodes on and off using ADDER's display manager software, or any RS232 control application.

Product codes

Product Features

Resolutions and cable lengths

Typical resolutions achievable include:
720p: 1280 x 720 x 60Hz at 300m. 
1080p:1920 x 1200 x 60Hz at 100m.


CD quality stereo audio is supported.

EDID display information

The module contains a default set of EDID information that supports display resolutions up to 1920 x 1080 @ 60Hz. In addition, the module will check during power up whether alternative EDID information is available from the KVM switch or extender that is connected to port A. If required, you can also harvest and store new EDID information from your display (Read and Store).


The ALAV102T uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply, thus simplifying installation. The USB cable must always be connected to a USB port on the computer that is capable of providing up to 300mA.

Small footprint

The ALAV102T has been designed to use minimal space around your host systems, allowing you to neatly locate the transmitter. moulded cables also reduce cable clutter, keeping the device easily accesable at all times.

RS232 for disabling/re-enabling receiver connections

Using the onboard RS232 interface, individual transmission paths can be disconnected allowing remote screens to sleep, and wake on re-connection. This saves power and screen hours in use. Using a KVM over IP device such as the AVX5016, you can directly control up to 32 individual transmission paths from anywhere in the world.


ALAV102T is the first ADDERLink transmitter to feature AV-KVM ports. These ports allow you to connect directly to a KVM extender. This allows you to add additional devices such as touch screens and keyboards.


Video Resolution

All HD resolutions up to 1920 x 1080

Extension Distance

300 meters at 1280 x 1024 @ 60Hz
200 meters at 1600 x 1200 @ 60Hz
100 meters at 1920 x 1080 @ 60Hz

O/S Compatibility

Operating system independent


USB Type A, D type 15 pin male (video); 3.5mm male audio jack, D type 9pin female (RS232), and two RJ45 ports

Physical Design 

ABS moulded plastic. (H) 70mm, (W) 52mm, (D) 25mm


USB powered ( Max 300mA @5V DC)

Operating Temperature

0 - 40 deg C



Associated products


The CATx Dual Computer Access Modules (CAMs) are highly compact devices that allow you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems.

ADDERLink® AV100

The ADDERLink AV100T is an audiovisual extender delivering high video resolutions and superb quality audio up to 300m using standard CATx cable (x=5,5e,6,7).


This digital signage extender is possibly the easiest to install point-to-point extender available today. By transmitting the power to the receiver via the cable it removes the need for extra power supplies and sockets at the screen.

A 4-way transmitter is available for point-to-multipoint transmission.

Product Gallery


Product manual
Product datasheets
Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
Ordering information

Order Codes

XX= Mains Lead Country Code:
UK = United Kingdom
US = United States
EURO = Europe
AUS = Australia


Are you interested in this product and would like to find out more?

Our team of KVM experts are on hand to help guide you through our extensive range of products, understand how Adder can help your KVM requirements and of course anwser any queries you may have.

Use this form to enquire about Adder's products and services. One of our IP KVM experts will be in touch with you as soon as possible.

If you need technical support, please click here instead