ADDERLink® DV100 

Pixel-perfect digital video extension with simultaneous audio via an HDMI connection. Distributing content in line with the High-bandwidth Digital Content Protection (HDCP) standard to enable uninterrupted extension across distances of up to 50m over a single CATx cable

ADDERLink DV100 HDMI Video Extender


ADDERLink® DV100 - HDMI is an easy to install, highly compact digital video extender system capable of transmitting an HD video stream with simultaneous audio over a single CATx cable via HDMI connection. Allows you to locate your media playback hardware in a secure and temperature-controlled environment. Your valuable systems are kept safely away from the display point environment whilst maintaining precisely the same user experience.

  • Pixel-Perfect: delivers digital video and simultaneous audio with optimum clarity
  • Distributes the exact content seen on the local monitor: up to 50m over a single CATx cable via HDMI
  • External power supplies are not needed: energy efficient design uses less than an eighth of the power required by some competing systems
  • Small form factor dongle: ensures optimum space saving
Product codes
ALD network diagram

Product Features

  • Pixel-perfect digital video: using an uncompressed communication system with zero loss of data for resolutions up to 1920 x 1200 @ 60Hz (WUXGA)
  • Digital audio: Supports 8 channels of HDMI audio
  • Support for HDCP: in line with the High-bandwidth Digital Content Protection (HDCP) of the HDMI standard, to prevent the interruption of data flow
  • Video, audio and power share a single cable of up to 50m: distribution up to 50m over a single CATx cable (achievable extension distance dependent on cable type and number of connection intervals)
  • High energy efficiency: power is harvested from a standard USB socket so external PSUs are not needed
  • Interchangeability amongst the ADDERLink DV family of extenders: enabling cross-connection between HDMI transmitters and DVI-D receivers
  • EDID management: Extended Display Identification Data (EDID) enables the remote system to exactly mirror the data coming from the source monitor
  • Plug and Play: ADDERLink DV100 extenders are delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software
  • Robust yet lightweight: tough but light ABS enclosures along with reliable internal and external connectors to withstand environmental pressures


Audio The system delivers 8 channels of HDMI audio with sample sizes of 16, 20 or 24bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz.

Approvals / Compliance

  • CE
  • FCC


HDMI interface The system supports resolutions such as 480p, 720p, 1080p or WUXGA (1920 x 1200) @ 60Hz (with reduced blanking) and 24bit color depth.

Hardware compatibility: All computers with HDMI connections.

Cable Guidelines

Important extension distance Information:
Recommended cables are CAT7 shielded foiled twisted pairs:

  • Daetwyler 7702 Flexible patch cable
  • Daetwyler 7120 Bulk Cable.

CAT6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

Resolution Frequency Patch Connections Cable Type Distance
1920x1200 60Hz 0 CAT7a 50 metres
1920x1200 60Hz 0 CAT6a (shielded) 50 metres
1920x1200 60Hz 2 CAT6a (shielded) 40 metres
1920x1200 60Hz 2 CAT7a 40 metres

Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5m. Preferably patch cables should be of type CAT7 and less than 2m.


Operating Temperature: 0 to 40ºC / 32 to 104ºF

Connectors – Local Unit

Computer connections at transmitter (TX) HDMI type A male, USB type A (for power only)

Connectors – Remote Unit

Display connections at receiver (RX) HDMI type A male


Injection molded ABS cases:

45mm / 1.8’’ (w) x 63mm / 2.5’’(d) x 21mm / 0.8’’(h) with 30cm / 12” pigtails

Weight 250g / 0.6 lb per pair


USB powered, 5VDC -2.5W for both RX and TX units combined


Compatible with all known operating systems

Associated products

ADDERLink® DV120-DVI  

ADDERLink® DV120 is an easy to install, highly compact digital video extender system capable of transmitting an HD video stream over a single CATx cable via a DVI connection. This allows you to locate your media playback hardware in a secure and temperature-controlled environment.


ADDERLink DV104T is a high performance digital video extender and splitter that enables you to locate your critical play out hardware in a secure and temperature controlled environment away 


The ADDERLink® LPV has been designed to deliver stunning results at a really attractive price, making it the perfect introduction to professional digital signage. 


This digital signage extender is possibly the easiest to install point-to-point extender available today. By transmitting the power to the receiver via the cable it removes the need for extra power supplies and sockets at the screen.

A 4-way transmitter is available for point-to-multipoint transmission.

Product Gallery


Product manual
Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
Ordering information

Product Codes:
ALDV100P: DV100 Pair
ALDV100R: DV100 Receiver
ALDV100T: DV100 Transmitter

XX = Mains Lead Country Code:

UK = United Kingdom

US = United States

EURO = Europe

AUS = Australia

JP = Japan

CN = China


Are you interested in this product and would like to find out more?

Our team of KVM experts are on hand to help guide you through our extensive range of products, understand how Adder can help your KVM requirements and of course anwser any queries you may have.

Use this form to enquire about Adder's products and services. One of our IP KVM experts will be in touch with you as soon as possible.

If you need technical support, please click here instead