ePower Switch 8 Master

DISCONTINUED - This product is no longer manufactured

ePower Switch 8 Master

Overview

This product is now discontinued, but details are still available in our 'Legacy Products' section for information only.

Enable the remote power management of 8 devices over the Internet, Intranet or locally through an RS232 terminal connection.

The M8 Master is a power distribution and control unit with a built-in web server, Ethernet port and serial RS232 connection. It enables the user to control the power supply (turn on/off or restart), of up to 8 power sockets either remotely through a network, or locally through its serial RS232 connection. The number of controlled sockets can be increased to 40 by connecting up to four S8 (Slave) units using one IP address (total load 100 A / 230 V).

Product Features

Two password levels plus various administrator/user rights and security masks 

Two separate power inputs improve security and increase total current load (20 A / 230 V)

Twin mode controls a pair of power outlets at once (intended for servers with redundant power supplies)

Configuration functions are performed using ePS-Finder, a convenient tool for discovering, configuring and setting the IP address of ePowerSwitch devices on your network

Restart delay can be chosen between 5 and 60 seconds between off/on for activity at all power outlets 

Specification

  • Network standards: IEEE 802.3, 10BASE-T
  • Network protocols: TCP/IP, HTTP
  • Network connection: RJ-45 for UTP CAT5
  • Max.network cable length: 100 m (not included)
  • Serial connection: RS-232, SUB-D 9 female
  • Nominal input voltage: 230 V/50Hz
  • Input power socket: IEC-320
  • Output voltage: 230 V/50Hz
  • Output power socket: IEC-320
  • Maximum total current: 2 x 10A
  • Maximum current per outlet: 10A
  • LEDs: 1 for power supply A

1 for power supply B
8 for the power socket status
1 for Web server power and network traffic
4 for the connected Slaves

  • Operating temperature: 0°C to +40°C
  • Operating humidity: 10% to 80%
  • Dimensions: 437 x 107 x 42 mm
  • Weight: 2 kg
  • Approvals: CE, EN55022 & EN55024, RoHS
  • Guarantee: 2 years repair or replace
  • Front side / Back side -  A series of front-panel LEDs provide quick status view. 2 separate AC inputs allow powermanaging of devices with redundant power supply and a total load of 20 A.

Product Gallery

Downloads

Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy

Contact

Are you interested in this product and would like to find out more?

Our team of KVM experts are on hand to help guide you through our extensive range of products, understand how Adder can help your KVM requirements and of course anwser any queries you may have.

Use this form to enquire about Adder's products and services. One of our IP KVM experts will be in touch with you as soon as possible.

If you need technical support, please click here instead
    
Conntest